Disconnecting the antenna
Note/IllustrationAction
xx1900001948
Disconnect the antenna cable from the
connected services gateway by rotating
the connector.
1
Record the cable routine when you re-
move the cable from the cabinet.
2
xx2100001054
Take the cable out from the cable grom-
met.
3
xx1900001949
Remove the magnet part of the antenna
from the top the cabinet.
4
Continues on next page
Product manual - OmniCore V250XT 213
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.5 Replacing the connected services gateway
Continued
To Next Page
Loading...
