ABB OmniCore V250XT - Page 238

Note/IllustrationAction
xx1900001887
Remove the screws and lift out the robot
signal exchange proxy.
2
Removing the Ethernet extension switch (option)
Note/IllustrationAction
xx1900001888
Carefully pull the side of the Ethernet
extension switch and rotate it tightly to
take it out from the bracket.
1
xx1800000491
Continues on next page
238 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.8 Replacing the main computer
Continued