Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx2100000318
xx1900001913
Hang the conveyor tracking module into
the bracket and push the lower of it until
you hear a clear clicking sound.
3
xx1900001912
Continues on next page
296 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.2.15 Replacing the conveyor tracking module (CTM)
Continued
To Next Page
Loading...
