ABB OmniCore V250XT - Page 319

Note/IllustrationAction
Screws: Torx pan head screw M4x8 (3 pcs)Secure it with the screws.7
xx2100000830
Concluding procedure
Note/IllustrationAction
Closing the door on page 176.Close the door.1
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 166.
2
Product manual - OmniCore V250XT 319
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.3.3 Replacing the HMI signal (FlexPendant) connector
Continued