ABB OmniCore V250XT - Page 322

Note/IllustrationAction
xx2100000845
Remove the attachment screws on the
cover.
2
Push the cable grommet assembly into
the cabinet.
3
Take the cable grommet assembly out.4
Releasing the cables from the cable grommet assembly
Note/IllustrationAction
xx1900002332
Unscrew the cable entry frame from the
enclosure wall.
1
Continues on next page
322 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the cable grommet assembly
Continued