ABB | SACE Emax 2
Electronic accessories | 4 - Ekip Signalling 4K module
183 | © 2013 ABB | 1SDH001000R0002 - L7804
Continued from the previous page
The following table describes the programmable actions on the release:
Action Description
Trip RESET Reset of the opening signal.
Energy RESET
Resetting the energy counters (see the chapter "15 - Measuring
Measurements", and the paragraph "Energy meters", on page
135).
External Trip Opening of the circuit-breaker.
Switch On LOCAL
Switching of the connection from remote to local (see the
chapter "6 - Menu", and the paragraph "Settings Menu", on
page 69).
Signalling RESET Reset of the signals.
YO Command Tripping of the opening coil.
YC Command Tripping of the closing coil.
Switch On SET B
Switching the protections from configuration A to configuration
B (see the chapter "11 - Hi-Touch protections", and the
paragraph "Set A-B", on page 108).
To Next Page
Loading...
