ABB | SACE Emax 2
Ekip Touch protection release | 6 - Menu
73 | © 2013 ABB | 1SDH001000R0002 - L7804
Continued from the previous page
Measurements
Options Release
Network
Analyzer
• Voltage Sequence: it shows the last and penultimate
voltage sequences, positive and negative, measured.
• Counters: it allows you to display the number of
events monitored by the function that have taken place
in the last twenty-four hours and the totals.
• Wave forms: opens a list of the currents and voltages
for which an instantaneous wave form can be displayed.
Hi-Touch
G Hi-Touch
Maintenance
• Contact wear: shows the estimated percentage of
wear on the contacts
• Last Service Contact Wear: shows the percentage
of contact wear at the last maintenance
• Installation: shows the installation date of the
circuit-breaker.
• Last Maintenance: shows the date of the last
maintenance.
• Service RESET: it updates the values of the parameters
Last Service Contact Wear and Last Maintenance,
with the percentage of contact wear and the date set
on the release at the moment of that the command is
selected.
Touch
G-Touch
Hi-Touch
G Hi-Touch
(1)
Measurements available with Ekip Measuring or Ekip Measuring Pro modules.
(2)
Measurements available with Ekip Synchrocheck module.
Continued on the next page
To Next Page
Loading...
