ABB | SACE Emax 2
74 | © 2013 ABB | 1SDH001000R0002 - L7804
Ekip Touch protection release | 6 - Menu
Continued from the previous page
Last Opening measurements
To open the page, from the menu Measurements, you need to select History, Openings,
and an opening of the list.
Alternatively, if the main page or a level 2 page is displayed (see the chapter “1 - Layout of the
interface", and the paragraph "Structure of the pages”, on page 57”), you can open the page
relating to the last opening by pressing the iTEST key until the page is displayed.
NOTE: when an opening occurs, the page relating to the last opening is opened
automatically.
The page shows details related to the selected opening. To exit the page, press the iTEST key,
which opens the main page.
The page appears as follows:
1885.5A
L3
L2
L1
1903.1A
. . . .
14:07:13:406
Ne
n°01
A
Last Trip
L Protection
Mar 04, 2013
Figure 74
The following table provides a description of the various areas of the page:
Pos. Description
A Name of the page.
B
Time at which the selected opening occurred (time set on the release at the
moment of the opening)
C
Date at which the selected opening occurred (date set on the release at the
moment of the opening)
D The protection that tripped.
E
Number of the selected opening.
NOTE: every new opening is associated to an incremental number
F Measurements related to the protection tripped, at the time of opening.
Continued on the next page
To Next Page
Loading...
