ABB SCK - System Identification

10 Operating instruction SCK Gas Sampling System OI/SCK-EN Rev. E
System identification
The gas sampling system can be unambiguously identified by means of the
specifications on the nameplate. The nameplate is located on the left side
wall of the control cabinet. The nameplate is laid out as follows:
The individual areas of the nameplate have the following meaning:
No.
Meaning
1
Product name
2
Product number
3
Customer order number
4
Production number
5
Manufacturer's address
6
Serial number of the retractor
7
Serial number of the cooling module
8
Year of manufacture of the system
9
CE mark
10
Environment-Friendly Use Period (EFUP) mark
11
Warning triangle to DIN EN 61010: observe operating instruc-
tions
12
Electric connections
Nameplate