ABB SCK - Basic Safety Rules

54 Operating instruction SCK Gas Sampling System OI/SCK-EN Rev. E
Basic safety rules
These rules are intended for all persons handling the gas sampling system.
The purpose of these rules is to ensure that all persons handling the gas sam-
pling system are thoroughly informed about risks and safety measures and
that they observe the safety instructions in the operating instructions and on
the system. Failing to observe these rules can lead to a risk of damage to
property, injuries or even death.
Observe the following rules:
 Completely read through the Safety section and the sections pertaining to
your work. You must have understood these sections.
 Always keep the operating instructions handy nearby the gas sampling
system for reference.
 Pass on the operating instructions if the gas sampling system is re-sold.
Observe the following rules:
 Only persons fulfilling the requirements specified in these operating in-
structions may handle the gas sampling system.
 The gas sampling system may only be used for the intended purpose.
Never use the gas sampling system for any other purposes, even if they
appear reasonable.
 Take all safety measures specified in these operating instructions and on
the system. Specifically, use the prescribed personal safety equipment.
 Only work in the designated work areas.
 Do not make any modifications to the gas sampling system, e.g. by remov-
ing parts or attaching non-approved parts. Specifically, do not change or
disable any protective installations.
 Use only original spare parts when replacing defective components.
 The gas sampling system may only be operated if maintenance work is
performed regularly and expertly.
Target group for
these rules
Purpose of these
rules
Handling the
operating
instructions
Handling the gas
sampling system