126 Operating instruction SCK Gas Sampling System OI/SCK-EN Rev. E
Checking/correcting operating parameters
The gas sampling system control system has factory settings that need to be
modified to specific system conditions at start-up. You can edit alarm limits
in a set range to suit specific system conditions. Limited configuration serves
to protect the probe retractor against harmful or contradictory settings. A list
of operating parameters can be found in
Default operating parameter set-
tings
on page 48. You can display the operating parameters on the control
cabinet touchscreen (Setup ► Time Parameters, Setup ► Limit Parameters,
Setup ► Basic Parameters).
Refer to
Optimizing operating parameters
on page 51 for details on editing
operating parameters.
Modifying the SCK
controller operating
parameters
To Next Page
Loading...
