ABB SCK User Manual

6 Operating instruction SCK Gas Sampling System OI/SCK-EN Rev. E
About these operating instructions
These operating instructions apply to the SCK gas sampling system, product
number: 23919.
These operating instructions are intended to give all personnel handling the
gas sampling system the information required to perform the following tasks
correctly and safely:
 Transport at the company (for first-time delivery, relocation, storage,
putting back into operation)
 Set-up, unpacking and connection
 Start-up
 Operation
 Diagnostics and troubleshooting
 Maintenance
 Shutting down, disassembly, putting back into operation, storage and
disposal
These operating instructions are intended for the following groups:
 Process engineers and design engineers (for preparation of the installation
site)
 Transporter
 Assembly personnel
 Start-up personnel
 Operating personnel
 Maintenance personnel
 Storage personnel
 Disposal personnel
The illustrations in the operating instructions do not always depict the actual
layout of a gas sampling system as delivered. Therefore, the drawings in the
supplied system documentation are always authoritative.
Failing to observe the information in this document can lead to a risk of dam-
age to property, injuries or even death.
In order to ensure safety, all personnel handling the gas sampling system
must have read and understood the following sections of this document
before commencing any work:
 the section on Safety on page 53
 the sections describing the work to be performed
Scope and purpose
Target group
Illustrations in the
operating
instructions

ABB SCK Specifications

General

Brand	ABB
Model	SCK
Category	Industrial Equipment
Language	English