ABB SCK - Page 231

OI/SCK
-EN Rev. E Operating instruction SCK Gas Sampling System 231
The following table shows further procedure:
If the system ...
follow the following instructions:
is to be stored for a pro-
longed period
Storing the system on page 232.
is to be disposed of
Disposing of the system on page 234.
is to be relocated
Transporting the system in the company on
page 89.
is to be unpacked and
transported to another
place

Do not transport the probe retractor
without transport supports.
 Use adequately load-bearing and rigid
pallets.
 Use suitably sized transport crates for
longer-distance transports.
 Fasten sampling probe firmly on re-
tractor if it is not being demounted.
Note:
The retractor must not be transported by
fork-lift truck without suitable additional
transport packaging.
is to be put back into
operation
Start-up on page 111.
Further procedure