ABB SCK - Page 244

—
ABB MEASUREMENT & ANALYTICS |
OPERATING INSTRUCTION | OI/SCK- EN REV. E
SCK
Sample
conditioning for kiln
—
ABB Measurement & Analytics
For your local ABB contact, visit:
www.abb.com/contacts
For more product information, visit:
www.abb.com/analytical
Sampling system for dry gas
sampling at rotary cement kiln gas
exit and calciner gas exit
Measurement made easy
OI/SCK
-EN Rev. E 07.2021 Original instruction
—
SCK
Introduction
The SCK is a sampling system for dry gas
sampling at rotary kiln exit and calciner gas exit.
The SCK sampling system is suitable for
applications in rough environmental conditions
and for outdoor installations thanks to a
complete protection
cover.
Additional Information
Additional documentation on SCK is available for
download free of charge at www.abb.com/analytical.
Alternatively simply scan this code:
—
We reserve the right to make technical changes or
modify the contents of this document
without prior
notice. With regard to purchase orders, the agreed particulars shall prevail.
ABB does not accept any
responsibility whatsoever for potential errors or possible lack of
information in this document.
We reserve all rights in this document and in the
subject matter and illustrations contained
therein.
Any reproduction, disclosure to third parties or utilization of its contents – in whole
or in parts
– is forbidden without prior written consent of ABB.
© ABB 2021 3KXG141003R4201