ABB SensyMaster FMT430 - Process Connections

SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B 23
Process connections
FMT091 – Wafer type design FMT094 – Weld-on adapter FMT094 – Weld-on adapter with clamp ring threading
FMT092 – Partial measuring section
Figure 6: Pipe components (examples)
Pipe components
FMT091
– Wafer type design
In accordance with EN
1092-1: DN 40 to 200, PN 40
In accordance with ASME B16.5: 1½
to 8 in, CL 150 to 300
FMT092
– Partial measuring section
Flange in accordance with EN 1092
-1: DN 40 to 100 (larger nominal diameters on request), PN 10 to 40
Flange in accordance with ASME B16.5: 1½
to 8 in, CL 150 to 300
Male thread DN 25 to 80, R1 to 3 in
FMT094
– Weld-on adapter
For
rectangular ducts or pipe diameters ≥ DN 100 (4 in.), PN 16 to 40
Wetted materials
Stainless steel, galvanized