ABB SensyMaster FMT430 - Menu: Device Info

102 SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B
… 9 Operation
… Parameter descriptions
Menu: Device Info
This menu is only used to display the device parameters. The parameters are displayed independently of the configured access level,
but cannot be changed.
Menu / parameter
Description
Device Info
...Sensor
Selection of submenu ‘...Sensor’ using .
...Application Selector
Selection of submenu ‘...Application Selector
’ using .
...Application 1
...
...Application 8
Selection of
submenu ‘...Application 1’ ... ‘...Application 8’ using .
...Transmitter
Selection of submenu ‘...Transmitter
’ using .
Device Info / ...Sensor
Sensor Location Tag
Display of the measuring point tagging for the sensor.
Sensor Tag
Display of the tag number for the sensor.
Sensor Element Type
Display of the design of the thermal measuring element.
Sensor Length
Display of the insertion length of the sensor.
Feature Series
Display of the device family.
Sensor ID
Display of the sensor ID.
Sensor
Serial No.
Display of the sensor serial number.
Sensor Run Hours
Display of the operating hours of the sensor.
...Calibration
Selection of submenu ‘
...Calibration’ using .
Device Info / ...Sensor / ...Calibration
First Cal. Date
Display of the
calibration data of the sensor.
Last Cal. Date
Cal. Cert. No.
First Cal. Location
Last Cal. Location
Device Info /
...ApplicationSelector
Application
Display of the selected application (type of measuring medium).
Dig.In 0
Application
Display of the application assignment to the optional digital inputs.
Dig.In 1 Application
Dig.In 2 Application
Dig.In1+2Application