ABB SensyMaster FMT430 - Parameter Overview

SensyMaster FMT430, FMT450 THERMAL MASS FLOWMETER | OI/FMT430/450-EN REV. B 87
Parameter overview
Note
This overview of parameters shows all the menus and parameters available on the device. Depending on the version and
configuration of the device, not all of the menus and parameters may be visible in it.
Easy Setup
Language
Curr.Out 31/32/Uco
Curr.Out V1/V2
Curr.Out V3/V4
Dig.Out 41/42 Mode
Freq.Out 41/42
Freq.Out 41/42 100%
Freq.Out 41/42 0%
Puls.Out 41/42
Puls.Out 41/42 Width
Bin.Out 41/42
Dig.Out 51/52 Mode
Freq.Out 51/52
Freq.Out 51/52 100%
Freq.Out 51/52 0%
Binary Out 51/52
Dig.Out V1/V2 Mode
Binary Out V1/V2
Dig.Out V3/V4 Mode
Binary Out V3/V4
Application
Dig.In 0 Application
Dig.In 1 Application
Dig.In1+2Application
Unit Massflow Qm
Qm Max
Unit Volumeflow Qv@
Std. Conditions Vol@
Qv@ Max
Unit Temperature
Tm Max
Tm Min
Damping Q
Low Flow Cut Off