ACUTRONIC fabian Therapy evolution - Sensor Calibration

Configurations menu 37
fabian Therapy evolution | SW 5.1.x
Ref: 121003.EN / Date 2020-01-22
6.1 Calibration
The Calibration screen is the first screen that comes up when the Calibration
key is pressed. Then you can proceed through the menu options to select the
Calibration menu again.
The Calibration menu can be accessed through the Menu  Calibration button
on the keypad.
Calibration Menu at Therapy (only with flow sensor connector)
From the Calibration screen, you can calibrate the following Sensors:
• Flow sensor
• O
2
sensor
• SpO
2
module