78 Accessories and options
fabian Therapy evolution | SW 5.1.x
Ref: 121003.EN / Date 2020-01-22
High SpO
2
Alarm
The actual alarm limits and state (OFF) are also displayed in the graphical view next to the numeric
values with the high/low alarm limit symbol.
Alarm limits
12.4 External communication, PDMS
own PDMS interface is called acuLink. A license is needed to activate this feature, which can be
ordered through your local distributor.
fabian supports acuLink with three different protocols:
1. Acutronic proprietary RS232 protocol without wave data
2. Acutronic proprietary RS232 protocol with wave data
3. IVOI protocol from Philips for Intellibridge/Vuelink via RS232
There are two major version of our acuLink protocol available: version 3 and version 4. Each one is
supported by various drivers on the market. Please contact the manufacturer of your PDMS for
further info.
Data from our ventilators can be received by the CIS system of the following brands meaning that
there are drivers from these PDMS manufacturer compatible with the specific acuLink version):
To Next Page
Loading...
