ACUTRONIC fabian Therapy evolution - Ventilation Modes and Parameters; Ventilation Parameters

64 Ventilation parameters
fabian Therapy evolution | SW 5.1.x
Ref: 121003.EN / Date 2020-01-22
10 Ventilation parameters
Ventilation Parameters
Parameter
Mode
Description
Trigger
• duoPAP
Trigger
The trigger sensitivity can be adjusted from level
1  10.
There are 2 trigger functions:
Flow trigger
Pressure trigger
I-time
• duoPAP
Inspiratory Time
Freq
• duoPAP
Frequency (Rate)
BackupRate
• duoPAP
Backup Rate in duoPAP mode
P DUO
• duoPAP
Upper inspiratory pressure in duoPAP mode.
The lower pressure level is selected in duoPAP
mode via the CPAP parameter.
CPAP
• duoPAP
• nCPAP
Continuous Positive Airway Pressure
The ventilator provides continuous flow for
producing airway pressure at the set CPAP level
P
manual
• nCPAP
Manual Inspiratory pressure
Applying a manual breath
Next breath is possible after a block period of 200
ms.
O
2
• All modes
Oxygen concentration
Inspiratory oxygen concentration setting
O
2
Flush
• All modes
Oxygen flush
Perform O
2
flush / oxygen spray
(Preoxygenation for max. 2 minutes)
Flow
• O
2
Therapy
Flow setting
Max. time
manual breath
• All modes
Maximum time manual breath*
Maximum duration allowed for manual breaths.
Adjustable from 2  30s.
*In Settings menu
Flush Time
• All modes
Duration of O
2
Flush*
Adjustable from OFF; 20  120s.
*In Settings menu