Accessories and options 73
fabian Therapy evolution | SW 5.1.x
Ref: 121003.EN / Date 2020-01-22
USB HPLPM module
12.3.1.1 LEMO HPLPM (for devices with SN from AN-04000)
LEMO HPLPM module
The LEMO HPLPM is a patient cable with an integral Masimo MSLP-1 Board contained in an
enclosure that connects to Masimo Pulse Oximetry sensors and provides functional oxygen
saturation (SpO
2
), pulse rate (PR), perfusion index (PI), Plethysmograph Waveforms, and other
information through a serial digital interface.
The LEMO HPLPM contains a 9-pin (DB9) LNCS-compatible sensor connector with latch at the
sensor end, and a 7-pin LEMO connector at the opposite end so that it is compatible with the 7-pin
LEMO device port on the rear panel of the fabian ventilator. The total length of the LEMO HPLPM,
patient cable, and sensor cannot exceed 5 meters.
To Next Page
Loading...
