adept technology Cobra s600 User Manual

Adept Cobra s600/s800 Robot User’s Guide, Rev H 53
System Operation 5
5.1 Robot Status LED Description
The robot Status LED Indicator is located on the top of the robot. The color and blinking
pattern indicates the status of the robot.
The current robot models support the UL standard. The LED on these robots has an amber
LED. See Figure 5-1 for the status information displayed by this LED.
Legacy models have a bi-color, red and green LED. See Table 5-2 for the status
information displayed by this LED.
Figure 5-1. Robot Status LED Indicator Location
Table 5-1. Status LED Definitions on UL-Certified Robots
LED Status 2-Digit Status Panel Display Description
Off Off 24 VDC not present
Off OK High Power Disabled
Amber, Solid ON High Power Enabled
Amber, Slow Blink N/A Selected Configuration Node
Amber, Fast Blink Fault Code(s) Fault, see Section 5.2 on page 54
Amber, Solid Fault Code(s) Fault, see Section 5.2 on page 54
Robot Status LED
Indicator

adept technology Cobra s600 Specifications

General

Brand	adept technology
Model	Cobra s600
Category	Robotics
Language	English