EasyManua.ls Logo

adept technology Cobra s600 - Robot Maintenance Procedures; Field-Replaceable Parts and Maintenance Schedule

adept technology Cobra s600
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adept Cobra s600/s800 Robot User’s Guide, Rev H 69
Maintenance 6
6.1 Field-replaceable Parts
The following two parts are the only field-replaceable parts:
These parts must only be replaced with the Adept Part Numbers identified in the
preceding table.
6.2 Periodic Maintenance Schedule
Table 6-2 gives a summary of the preventive maintenance procedures and guidelines on
frequency.
See also “Maintenance” on page 119 for cleanroom robots, and “Customer
Requirements” on page 126 for IP-65 robots.
Table 6-1. Field-replaceable Parts
Part Adept Part Number
Encoder battery 02704-000 (3.6 V, 8.5 Ah)
AIB (Amp-In-Base) 04900-000
WARNING: Only qualified service personnel may install
or service the robot system.
Table 6-2. Inspection and Maintenance
Item Period Reference
Check E-Stop, enable and key switches, and barrier
interlocks
6 months See Section 6.3
Check robot mounting bolts 6 months See Section 6.4
a
For robot models with the smaller, rectangular batteries, inspect the battery every 18
months to 3 years.

Table of Contents

Related product manuals