Adtech ADTECH4 CNC Series - Page 113

ADTECH4 SeriesCNC Maintenance Manual
After configuration, test the ping command on the PC in the same
network segment (same subnet mask) in the Intranet. If the return times
out, the connection has error; please check the physical connection.
The network environment requires independent NC network, which
shouldn’t be connected to office networks and the Internet, because the
network broadcast and regular query of Windows will block NC network
communication, thus affecting the communication performance.
040
Pretreatment segments
Range
:
10~200
Unit
:
Authority
:
Operation admin
Default
:
20
Effective time
:
Instant
Note
:
Pretreatment forward segments are used to set the segments of
pretreatment preview.
Pretreatment forward segments are used to set the segments of
pretreatment preview.
Pretreatment forward segments are used to set the segments of
pretreatment preview.
If this value is smaller, the balance value is set according to the actual
price effect because the forward data are insufficient and the speed can’t
be improved during small segment interpolating.
This parameter is invalid when P1.018 is set to Speed1.
041
Feed speed setting En
Range
:
0~1
Unit
:
Authority
:
Operation admin
Default
:
0
Effective time
:
Instant
Note
:
This parameter is used to modify the interpolation speed in
programming, making F programming invalid.