Adtech ADTECH4 CNC Series - Page 114

ADTECH4 SeriesCNC Maintenance Manual
Used for the cases that processing codes requires ignoring F-value.
042
Enable of G00 Inp mode
Range
:
0~1
Unit
:
Authority
:
Operation admin
Default
:
0
Effective time
:
Instant
Note
:
Used to set whether G00 instruction is moved with G01 mode
If G01 mode is used, the interpolation speed shall follow the setting of
minimum speed;
The acceleration is the interpolation acceleration.
043
Enable abnormal memory position jump
Range
:
0~1
Unit
:
Authority
:
Operation admin
Default
:
0
Effective time
:
Instant
Note
:
OFF: turn off this function
ON: turn on this function; when turned on, the processing ends because
the processing code has abnormal condition during processing; the
processing can be continued from the break point.
044
Pause Z to safe altitude
045
Pause A to safe altitude
Range
:
OFF workpiece coordinates, machine tool coordinates
Unit
:
Authority
:
Operation admin
Default
:
0
Effective time
:
Instant
Note
:
OFF: turn off this function
ON: turn on this function; when turned on, press the [Pause] key during