Adtech ADTECH4 CNC Series - Page 115

ADTECH4 SeriesCNC Maintenance Manual
code processing or execute home operation in home mode, Z axis or A
axis lifts to the safe altitude set by P1.049 or P1.050 automatically
(workpiece coordinates or machine tool coordinates).
046
Program home reference point enable
047
Mechanical home reference point enable
Range
:
0~1
Unit
:
Authority
:
Operation admin
Default
:
0
Effective time
:
Instant
Note
:
OFF: turn off this function
ON: turn on this function; when turned on, execute program or
mechanical home in home mode, return to the value set by coordinate
parameters - coordinate settings - reference point 1.
048
Clear coordinates in home mode
Range
:
MAC Coord G54 Coord
Unit
:
None
Authority
:
Operation admin
Default
:
MAC Coord
Effective time
:
Instant
Note
:
For setting in home mode, press axis X, Y, Z, A, B, C in Run - Absolute
position and the red LED flashes, press the [Cancel] button to clear the
coordinate system, press MAC Coord to clear machine coordinates, and
press G54 Coord to clear G54 workpiece coordinates. This function is
generally used for machine debugging. Do not use it if the machine has
been debugged.
049
Z-axis safe height
050
A-axis safe height
Range
:
-9999.999~9999.999
Unit
:
mm