Adtech ADTECH4 CNC Series - Page 129

ADTECH4 SeriesCNC Maintenance Manual
Effective time
:
Restart
Note
:
Set pulse direction; if the controller direction is reverse to actual drive
direction, please modify this parameter to adjust the rotation direction of
motor.
020
Effective voltage level for X external home
Effective voltage level for Y external home
Effective voltage level for Z external home
Effective voltage level for 4 external home
Effective voltage level for B external home
Effective voltage level for C external home
Range
:
0~1
Unit
:
LOGIC VOLTAGE LEVEL
Authority
:
Super admin
Default
:
0
Effective time
:
Instant
Note
:
Set the effective voltage level of external home sensor switch during
home operation.
Low level
High level
021
X axis ROUND settings (restart)
Y axis ROUND settings (restart)
Z axis ROUND settings (restart)
4 axes ROUND settings (restart)
B axis ROUND settings (restart)
C axis ROUND settings (restart)
Range
:
0~9999999
Unit
:
Pulse
Authority
:
Super admin
Default
:
0
Effective time
:
Restart
Note
:
Round function is available on hardware version 1.0 or later only;