The OsmoPRO
®
Micro-Osmometer Service Manual
International concern about environmental
pollution resulting from improper disposal of
products and materials at the end of their use-
ful life resulted in an increase in legislation to
control the methods and procedures used to
handle waste electrical and electronic equip-
ment.
While the regulatory status in some regions of
the world progressed to the point where for-
mal legislation is already in effect, many
other regions are in the process of creating
similar legislation or adopting legislation
already in existence in other areas. The result
in the years ahead include more stringent con-
trol over disposal of products and recycling of
their components once they are withdrawn
from use.
Since regulations governing the disposal of
the instrument and accessories may vary
depending upon geographic location, the fol-
lowing guidelines are provided to assist in
identifying the options available once decid-
ing to replace or dispose of this product:
• Contact the supplier who sold you the
product. Whether this was Advanced
Instruments itself, or one of its author-
ized dealers, this supplier should be
knowledgeable about the national and
local regulations governing disposal
and recycling of products in your area.
In some cases, this supplier may be
legally obligated to accept the product
from you and arrange for proper dis-
posal or recycling with no further
involvement on your part. Alternately,
the supplier can provide you with spe-
cific instructions for actions that you
can take to dispose of the product prop-
erly.
• Contact your local government agency
responsible for waste collection and
disposal. They can identify procedures
and restrictions in effect to ensure
proper disposal, and available locations
where products can be sent.
• Contact Advanced Instruments
Technical Services Department:
• 1 (800) 225-4034 (toll-free within
the United States and Canada; after
regular business hours, dial exten-
sion 2191)
• +1 (781) 320-9000 (outside of the
United States and Canada))
• Fax your inquiry to (781) 320-0811
Service personnel will provide you
with contact information for local
disposal, or instructions for return-
ing the product directly to
Advanced Instruments.
Product Disposal and Recycling
To Next Page
Loading...
Need help?
General
