33
The OsmoPRO
®
Micro-Osmometer Service Manual
Main Screen Navigation
Powering-up the Instrument
• Connect the power cord to the input
mode on the instrument’s rear panel
and plug it into an electrical outlet.
• Push the rocker-style power to switch
on the instruments rear panel into the
(I) position.
The instrument will display the OsmoPRO
Splash screen.
The Main screen appears after the instru-
ment is powered on and the software has fin-
ished loading. The user can navigate to all of
the instrument functions from this screen.
Press MENU to open the Main Menu and
choose from the list of available functions:
RESULTS, CALIBRATION, DIAGNOS-
TICS and SETTINGS.
The icons that appear on the naviga-
tion screens are defined in the table
below:
Table # 1
Assistance Information
Press the assistance icon to display informa-
tion about the system. Select one of the four
tabs to view additional information regarding
the instrument:
• Advanced Instruments Tab: Displays the
contact information for the manufacturer:
• Local Distributor Tab: Contains the con-
tact information for the local distributor:
System Operation
To Next Page
Loading...
