55
The OsmoPRO
®
Micro-Osmometer Service Manual
These errors are displayed in the results col-
umn on the Main screen; the tube position
will appear in red:
Sample Test Errors are recorded on the
printout and stored in the Events Database.
If a Sample Test Error cannot be resolved
through troubleshooting procedures, please
call our Technical Services Department for
assistance.
NOTE: If one of these errors occurs,
consider re-pipetting the sample care-
fully following the proper techniques
discussed in Chapter 4. If multiple
tests produce these error messages,
refer to the sample test error trou-
bleshooting table.
To Next Page
Loading...
Need help?
General
