Advanced Instruments OsmoPRO Service Manual

Note: Use caution when removing the fuse
holder from the power entry module.
3. Remove the Fuse Holder, and then remove
the two fuses (
Figure 2).
4. Insert the two replacement fuses into the
Fuse Holder (
Figure 3).
5. Close the Fuse Holder Door.
Figure 2
Figure 3
Fuse
Holder
Fuses (2)
70011RPM Rev0
(OsmoPRO Service Manual)
Page 2 of 2

Advanced Instruments OsmoPRO Specifications

General

Brand	Advanced Instruments
Model	OsmoPRO
Category	Measuring Instruments
Language	English