Advanced Axis AX-CTL-1L User Manual

www.advancedco.com
47
4.5.1 Installing an AV-ZS Module
The AV-ZS audio zone splitter module is supplied with three (3) metal hexagon spacers and one (1) nylon spacer.
Remove the three (3) lower screws securing the AV-AMP-80 module to its mounting plate and install the three (3)
provided metal hexagon spacers. Install the provided nylon spacer into the fourth mounting hole on the AV-ZS
module as indicated in figure 25.
Mount the AV-ZS audio zone splitter module above the AV-AMP-80 audio amplifier module to the three (3)
previously installed metal hexagon spacers and secure with the previously removed screws (see figure 25).
Failure to tighten screws will defeat the protection circuitry designed to protect the module from damage
due to lightning and static electricity.
Nylon Spacer
Figure 25 – AV-ZS to AV-AMP-80 Mounting

Advanced Axis AX-CTL-1L Specifications

General

Brand	Advanced
Model	Axis AX-CTL-1L
Category	Security System
Language	English