Milling Machine Series
CNC operations
154
Advantech-LNC Technology Co., Ltd.
As for user parameters, the 【User parameters】 key on the human machine page can be pressed to enter user
parameter setup page, and arrow keys on the MDI panel can be used to select parameters you wish to modify,
enter numerical values in the input area followed by pressing the <Input> key to complete the setup as shown in
the figure below.
If a known parameter needs to be found, its parameter number can be entered into the input area before
pressing the 【Find】 key on the human machine page, the cursor will move directly to the parameter
corresponding to this number as shown in the figure below.
To Next Page
Loading...
Need help?
General
