OPERATION
3-1-59
Storing data
To store data, press the soft key for the type of store required, e.g. [Partial Store] and
define a store location via the numerical key pad, then press [enter].
Note...
The settings for the sequential calling tones are stored via the calling tones menu in
UTILITIES, see Fig. 3-1-28. These stores can be erased from the Store Erase Menu.
Store erase
Unlock to Level 1. Pressing [Store Erase] causes the Store Erase Menu to appear on the
screen. The opportunity to erase all the stores of a given type is available by pressing the
relevant key and then pressing [Erase].
To Next Page
Loading...
Need help?
General
