GPIB OPERATION
3-2-27
LF GENERATOR FREQUENCY
LFGF
Set LF Generator frequency (short form)
:VALUE Set LF Generator frequency
:INC Set LF Generator frequency step
Data type :
Decimal Numeric Program Data
Allowed suffices : Any one of: GHZ, MHZ, KHZ or HZ
Default suffix : HZ
:UP
Go UP one step
:DN Go DOWN one step
:RETN Return to original setting
:XFER Transfer current value to be the new setting
:SIN Select sinusoidal waveform
:TRI Select triangle waveform
:SQU Select square waveform
Data type :
None
Allowed suffices : None
Default suffix : None
Example:
LFGF:VALUE 25KHZ;INC 500HZ
LFGF? Prepares message containing information on LF Generator
Frequency setting in the following format:
:LFGF:VALUE <nr2>;INC <nr2>
Example:
:LFGF:VALUE 25067.8;INC 500.0
To Next Page
Loading...
Need help?
General
