Aeroflex 2030 Series User Manual

OPTION 008 RF PROFILES AND COMPLEX SWEEP
Annex-C-23
RF offsets
The GPIB commands for RF LEVEL OFFSETS are as follows:
RFLV
:OFFS [not used alone]
:NUM Select RF Offset (1-5)
Data type: Decimal Numeric Program Data
Allowed Suffices: None
Default Suffix: None
:VALUE Set current RF Offset value
Data type: Decimal Numeric Program Data
Allowed Suffices: dB
Default Suffix: dB
:ENABLE Enable Selected RF Offset
:DISABLE Disable Selected RF Offset
:SAVE Store RF Offsets and status in non-volatile memory
Data type: None
Allowed Suffices: None
Default Suffix: None
RFLV:OFFS?
Responds with RF Offset Selected, its Value and its Status as
follows:
:RFLV:OFFS:NUM <nr1>;VALUE <nrf>;<status>
Example: :RFLV:OFFS:NUM 3;VALUE -40.0;ENABLE

Aeroflex 2030 Series Specifications

General

Brand	Aeroflex
Model	2030 Series
Category	Portable Generator
Language	English