GPIB OPERATION
3-2-11
RF LEVEL
RFLV
Set RF output level (short form)
:VALUE Set RF output level
Data type :
Decimal Numeric Program Data
Allowed suffices : Any one of: DBM, DBV, DBMV, DBUV, V, MV or UV
Default suffix : dBm unless changed by UNITS command
:INC
Set RF level step (dB)
Data type :
Decimal Numeric Program Data
Allowed suffices : DB only
Default suffix : DB
:UP
Go UP one step
:DN Go DOWN one step
:RETN Return to original setting
:XFER Transfer current value to be the new setting
:ON Turn RF output ON
:OFF Turn RF output OFF
Data type :
None
Allowed suffices : None
Default suffix : None
:TYPE
Selects EMF or PD for voltage related units
Data type :
Character Program Data (EMF or PD)
Allowed suffices : None
Default suffix : None
:UNITS
Select default RF level units.
Data type :
Character Program Data (DBM, DBV, DBMV, DBUV, V, MV
or UV)
Allowed suffices : None
Default suffix : None
Examples:
RFLV:VALUE -27.3DBM;ON
RFLV:TYPE PD;VALUE 1.23UV
:OFFS
[not used alone]
:VALUE Set Offset of current band
Data type :
Decimal Numeric Program Data
Allowed suffices : DB only
Default suffix : DB
:ON Turn ON offset of current band
:OFF Turn OFF offset of current band
:ENABLE Enable Offsets
:DISABLE Disable Offsets
:SAVE Store Offsets in memory
Data type :
None
Allowed suffices : None
Default suffix : None
Example:
RFLV:OFFS:VALUE -0.2DB;ON;ENABLE
To Next Page
Loading...
Need help?
General
