OPTION 006 Avionics
Annex-B-19
GPIB OPERATION
MODE
Set avionics mode
(in addition to existing modulation mode commands)
Data type : Character Program Data (valid combinations of SDM, DDM,
VOR, BEAR or AM2, see Table below)
Allowed suffices : None
Default suffix : None
Examples:
MODE SDM,DDM (select ILS mode with DDM)
MODE SDM,AM2 (select ILS mode with AM2)
MODE SDM (select ILS variable phase mode)
VALID MODE COMBINATION TABLE
ILS VOR
SDM,DDM VOR,BEAR
SDM,AM2 VOR,AM2
NOTE...
Order is not important, for example SDM,DDM is equivalent
to DDM,SDM.
MODE?
Prepares message containing information on Modulation Mode
in the following format:
:MODE<mode>
where: <mode> is character program data indicating the
modulation mode settings.
Examples:
:MODE VOR,BEAR
:MODE SDM,DDM
:MODE SDM
To Next Page
Loading...
Need help?
General
