OPTION 005 GMSK Bt 0.3
Annex A-26
FRAME
:LOAD
[not used alone]
Load frame data into the GMSK editor. All 8 slot values must
be entered
Data type: Multiple decimal numeric program data
Allowed suffices: None
Default suffix: None
:SAVE Save frame data to the requested frame number (0−99)
Data type: Decimal numeric program data
Allowed suffices: None
Default suffix: None
FRAME? Prepares message containing information on the contents of the
frame requested in the following format
:FRAME:LOAD:<frame data>
where: <frame data> is multiple decimal numeric program
data defining the contents of the frame requested.
Data type: Decimal numeric program data
Allowed suffices: None
Default suffix: None
Example:
:FRAME:LOAD 34,6,15,99,0,22,44,76
MFRAME
:LOAD
[not used alone]
Load multiframe data into the GMSK editor. All 26 frame
values must be entered
Data type: Multiple decimal numeric program data
Allowed suffices: None
Default suffix: None
:SAVE Save multiframe data to the requested multiframe value (0−99)
Data type: Decimal numeric program data
Allowed suffices: None
Default suffix: None
MFRAME? Prepares message containing information on the contents of the
multiframe requested in the following format
:MFRAME:LOAD:<mframe data>
where: <mframe data> is multiple decimal numeric program
data defining the contents of the multiframe requested.
Data type: Decimal numeric program data
Allowed suffices: None
Default suffix: None
Example:
:MFRAME:LOAD 56,78,92,22,....12,0,5
SFRAME
:LOAD
[not used alone]
Load superframe data into the GMSK editor. All 51
multiframe values must be entered
Data type: Multiple decimal numeric program data
Allowed suffices: None
Default suffix: None