OPTION 006 Avionics
Annex-B-21
:UP
:DN
:RETN
:XFER
Go UP one step
Go DOWN one step
Return to original setting
Transfer current value to be the new setting
Data type : None
Allowed suffices : None
Default suffix : None
Examples:
DDM90:DEPTH 40PCT;INC 0.1;DN;DN
DDM150:DEPTH 0.1554;INC 0.0002;UP;UP;UP
DDM? Prepares messages containing information on DDM in the
following format:
:<ddm>:DEPTH <nr2>;INC <nr2>
where <ddm> is a program mnemonic indicating the
predominant tone (DDM90 or DDM150).
Examples:
:DDM90:DEPTH 0.2000;INC 0.01
:DDM150:DEPTH 0.4000;INC 0.01
SUPPRESS [not used alone]
:TONE90
:TONE150
:NONE
Suppress the 90 Hz tone
Suppress the 150 Hz tone
Remove tone suppression
Data type : None
Allowed suffices : None
Default suffix : None
Examples:
:SUPPRESS;TONE150
:SUPPRESS:NONE
SUPPRESS? Prepares messages containing information on tone suppression
control in the following format:
:SUPPRESS:<status>
where: <status> is a program mnemonic indicating the tone
suppresson state.
ILSF Set ILS Frequency (short form)
:VALUE
:INC
Set ILS Frequency
Data type : Decimal Numeric Program Data
Allowed suffices : GHz, MHz, KHz, Hz
Default suffix : Hz
:UP
:DN
:RETN
:XFER
Go UP one step
Go DOWN one step
Return to original setting
Transfer current value to be the new setting
Data type : None
Allowed suffices : None
Default suffix : None
Example:
ILSF:VALUE 30 Hz;INC 0.1;DN;DN;DN
To Next Page
Loading...
Need help?
General
