vi
WARNING
Heavy equipment
The weight of this equipment exceeds the 18 kg (40 lb) guideline for manual handling by a single
person. To avoid the risk of injury, an assessment should be carried out prior to handling which
takes account of the load, workplace environment and individual capability, in accordance with
European Directive 90/269/EEC and associated National Regulations.
WARNING
Tilt facility
When the instrument is in the tilt position, it is advisable, for stability reasons, not to stack other
instruments on top of it.
Pulse input
Before switching the instrument on, ensure that no signal voltage is present on the PULSE INPUT
socket.
Static sensitive components
This equipment contains static sensitive components which may be damaged by handling — refer
to the Maintenance Manual for handling precautions.
Suitability for use
This equipment has been designed and manufactured by Aeroflex to generate low-power RF
signals for testing radio communications apparatus.
If the equipment is not used in a manner specified by Aeroflex, the protection provided by the
equipment may be impaired.
Aeroflex has no control over the use of this equipment and cannot be held responsible for events
arising from its use other than for its intended purpose.
To Next Page
Loading...
Need help?
General
