140 7713395 R2
Table 13 Power LED fault codes (continued)
CODE
(Fast-Slow)
FAULT DESCRIPTION
4-4
Configuration jumper problem
5-1
PII fault (Normal state when turned off)
5-2 HFS/LFS fault
5-3 MOS/Start switch
6-1
Output drive failure
6-2 Internal fault
6-3
Device specific fault
6-4
Accessory fault
7-7
Unrecognized fault
8.9. KS45 & TB45 Controller LEDs
Color
Meaning
Green
Ok
Green, blinking No Modbus communications
Red Excessive Temperature or bad Thermocouple
Red, blinking Internal fault, replace controller
8. APPENDIX CONTINUOUS MIXED-FLOW GRAIN DRYER WITH COMMANDER CONTROL SYSTEM
To Next Page
Loading...