© Agilent Technologies 2001–2003 Agilent 3070 System Installation Manual (MS Windows Version) 2-33
Chapter 2: MS Windows System Installation Reference: Standard Config File Specifics
drivethru
Enables the testing of digital devices through series resistors using Agilent TestJet
technology. You can use the Agilent Drive Thru Test in combination with the
Agilent Access Consultant to identify and selectively remove nonessential probing
locations.
express fixturing
Allows Agilent SimPlate Express or cassette fixtures for your board test. If this
option is not enabled, only an Agilent SimPlate Fixture can be used.
flash70
Enables flash memory programming mode.
flash isp
Enables flash isp software, which supports new data formats. Only supported with
ControlXTP cards.
incircuit test
Enables automatic in-circuit test generation for systems which do not have it.
magic
Enables Agilent MagicTest circuit analysis mode.
multiple board
versions
Enables Agilent Multiple Board Versions.
paneltest
Enables software that helps you develop tests for multiple-board panels on one
fixture.
pld isp
Enables native PLD programming on the 3070 and supports CPLD programming
with STAPL, SVF, Jam and JBC file types. Only supported with ControlXTP cards.
polarity check
Enables Agilent Polarity Check testing.
powered testing
Allows limited powered testing on an Agilent 3072 system (a maximum of two
HybridPlus Cards, one HybridPlus and one ChannelPlus Card, or one HybridPlus
and one AccessPlus Card per module).
silicon nails
Enables automatic generation of silicon nails ITL test files derived from library tests
and customized to the board topology on user selected devices.
Table 2-13 Some enable <keywords> statements in the standard config file
enable <keywords> Functional Description:
To Next Page
Loading...
Need help?
General
