Notices
© Agilent Technologies, Inc. 2007-2013
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or transla-
tion into a foreign language) without prior
agreement and written consent from
Agilent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
G3430-90015
Edition
Twelfth edition, January 2013
Eleventh edition, July 2012
Tenth edition, March 2012
Ninth edition, June 2011
Eighth edition, February 2011
Seventh edition, November 2010
Sixth edition, June 2010
Fifth edition, September 2009
Fourth edition, April 2009
Third edition, September 2008
Second edition, January 2008
First edition, April 2007
Printed in USA
Agilent Technologies, Inc.
2850 Centerville Road
Wilmington, DE 19808-1610 USA
安捷伦科技 （上海）有限公司
上海市浦东新区外高桥保税区
英伦路 412 号
联系电话：（800）820 3278
Safety Notices
A CAUTION notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION notice
until the indicated conditions are fully
understood and met.
A WARNING notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in personal injury or
death. Do not proceed beyond a
WARNING notice until the indicated
conditions are fully understood and
met.
Firmware Version
This manual is written for 7890 Series GCs
using firmware version B.02.01.
To Next Page
Loading...
Need help?
General
