Agilent Technologies 7890 Series User Manual

22 Advanced Operation Manual
2 Flow and Pressure Modules
Inlet Modules
These modules are used with specific inlets. They provide a
controlled flow or pressure of carrier gas to the inlet and
control the septum flow rate.
Module locations depend on the type of module and the
length of the tubing connecting it to the inlet.
If you have a Front inlet, its flow module must go in Slot 1.
If you have a Back inlet, its flow module must go in Slot 2.

Agilent Technologies 7890 Series Specifications

General

Brand	Agilent Technologies
Model	7890 Series
Category	Laboratory Equipment
Language	English