Appendix B 257
System Recovery
System Recovery
B. System Recovery
Notes on executing the factory recovery function
Executing the factory recovery function causes the following conditions:
o In addition to the Windows operating system, the following settings of the E5071C are
returned to the factory state.
• Network setting
• GPIB setting
• Printer setting
o The driver for the supported printer installed after purchase is deleted.
o You need to execute initial registration again.
o The firmware revision you installed remains even if you perform factory recovery.
Files you created using the save function (files in the D drive) are not affected, but we
recommend backing them up before executing system recovery for precautionary
purposes. For more information on backup, refer to “Backing Up the Data” as described in
E5071C Online Help.
To Next Page
Loading...
Need help?
General