262 Appendix B
System Recovery
System Recovery
Procedure to create the user backup image (HDD Revision: CN924 or
below)
This section describes how to create the user backup image. The C and D drives’ contents
saved in this procedure are recalled when the user recovery function is executed.
Step 1. Close the E5071C application by pressing System > Service Menu > Exit.
Step 2. Close all other applications you currently open.
Step 3. From the Windows start menu, select All Programs > Acronis > Acronis True Image.
Step 4. Click “No, Thanks” button.
Figure 0-3 Recover User Backup
Step 5. Click Backup
To Next Page
Loading...
Need help?
General