Agilent Technologies E5071C ENA - Receiver Ports Characteristics Adjustment; Receiver Absolute Gain Adjustment; Receiver RF Range Adjustment

Chapter 3 55
Adjustment
Required Adjustment after Replacing Assembly
1. Chapter Title
2. Chapter Title 3. Adjustment
4. Chapter Title
5. Chapter Title
2) Over 8.5 GHz Options
Receiver Ports Characteristics Adjustment
The purpose of this procedure is to adjust source match, directivity and tracking.
Required equipment for the receiver ports characteristics adjustment
1) Up to 8.5 GHz Options
2) Over 8.5 GHz Options
Receiver Absolute Gain Adjustment
This item writes the coefficient in Absolute measurement.
Required equipment for the receiver absolute gain adjustment
None
Receiver RF Range Adjustment
This item writes the coefficient of RF Range.
Required equipment for the receiver RF range adjustment
None
NOTE This item is for up to 8.5 GHz Options.
Description Recommended Model
SMA Cable Agilent p/n 5062-6693
Description Recommended Model
Calibration Kit Agilent 85032F
N(m)-N(m) Cable Agilent N6314A (p/n 8120-8862)
Description Recommended Model
Calibration Kit Agilent 85052D
SMA Cable Agilent p/n 5062-6693