Chapter 2 39
Performance Test
2. FREQUENCY ACCURACY TEST
2. Performance Test
2. FREQUENCY ACCURACY TEST
Description
This test checks the frequency accuracy of the E5071C test port output signal. The
frequency accuracy is checked at several frequency from 9kHz to 20 GHz range. Since the
E5071C employs a PLL frequency synthesizer for the signal source, the frequency
accuracy at these frequency points can verify the accuarcy for the entire frequency range.
Test equipment
1) Up to 8.5 GHz Options
2) Over 8.5 GHz Options
Frequency Counter
48 inch BNC cable
N(m) - BNC(f) adapter
Frequency Counter 1
Frequency Counter 2
48 inch BNC cable
N(m) - BNC(f) adapter
Cable
APC 3.5 (f)-(f) Adapter
To Next Page
Loading...
Need help?
General