258 Appendix B
System Recovery
System Recovery
Procedure to execute the factory recovery (HDD Revision: CN925 or
above)
NOTE The recovery function for Factory image is only loaded.
The User back up function is not available.
Step 1. Turn ON the E5071C.
Step 2. The boot option is displayed. Use the downward arrow key to select the “Agilent Recovery
Solution” and press Enter
Step 3. Windows PE starts up and “Agilent Recovery Program” window is displayed. Press 1, and
then press Enter.
Figure B-1 Agilent Recovery Program(1/1)
Step 4. A warning message is displayed. Press 1, and then press Enter.
Figure B-2 Agilent Recovery Program(1/2)
Step 5. Caution is displayed. Press 1, and then press Enter.
To Next Page
Loading...
Need help?
General